Visit A Toyota Dealer Serving Huntington Beach And Get Yourself A Suitable Vehicle Today

Many people live in Huntington Beach who own Toyota vehicles, and they regard car ownership like a DIY project. Much as they want to do whatever odd jobs come up in their home themselves, they want to do all the work that they can on their cars so that they can save money, and also because they enjoy it.


If you’ve made a purchase from a Toyota dealer serving Huntington Beach dealer recently and this sounds like you, then there’s nothing wrong with that. It’s great to be self-reliant, and doing some of your car maintenance is a way to be frugal and learn some excellent life skills.

Here are some areas of car maintenance that you should be able to handle, even if you don’t have much of an automotive background.

Fuel Filter Replacement

You need to replace your fuel filter periodically because doing so protects your car from costly damages. Once a year should work if you drive your car the average amount. You’ll need to be sure of the details as you go about this job, but you should be able to handle it if you watch some videos on YouTube beforehand.

First, relieve fuel system pressure by locating the fuel pump fuse on the fuse box. If you don’t have one, then there’s going to be a relay that operates the fuel pump instead. Start the car, and then once the engine is running, you can pull out the relay or fuse. When the engine dies, you’ll know you pulled the right one.

Next, disconnect the fuel line from the filter and grab two open-end wrenches that match your fuel filter fittings. Hold one on the actual filter and turn the other counterclockwise until the bolt comes off. Slide the fuel line off the bolt. Repeat these steps as you get to the other side of the filter.

You can now safely remove the old fuel filter. Mostly they are held in place by a clamp that you can get off using a flathead screwdriver. Be careful though, as your old filter might still have traces of gas in it. You can now change the fuel filter washers. Just be sure to match the new ones up correctly.

Lastly, you can install the new filter, which is available at any auto parts store in Huntington Beach. It’s the reverse of the process you just went through. Return the fuel pump relay or fuse, and then try to start the car. If you did it all correctly, then your Toyota now has a new fuel filter, and you can congratulate yourself for a job done well. You’re probably looking at about 30 minutes for this job.

Brake Pad Replacement

You can also replace the brake pads on your Toyota with minimal difficulty. The only real challenge is that you need to jack it up so that you can get access to the undercarriage. You should replace your brake pads about every 20,000 miles. If you do lots of stop-and-go driving, though, you may want to do it sooner.

First, jack up your Toyota and be sure that it is resting firmly on the jack stands. Remove the lugs on your tires, and then remove the wheel. You’ll next need to remove the brake caliper so that the brake pads can slide out through the top. Again, it’s helpful to watch a video so you can get an idea of what the caliper looks like in your vehicle. There’s a bolt on either side of the caliper, and you should remove these. Then hold the caliper from the top and pull upwards. You should be able to get it off without much trouble, and then the old brake pads should slide off.

You’ll now replace the old brake pads with new ones, again easily purchased at an auto body shop. You can secure them with the same retaining clips that were holding the old ones in place. Proceed gently. This is a job for finesse, not strength.

You should next compress your brake piston by using a C-clamp to put the end of the screw on it against the piston. The other end should be resting against the back of the caliper assembly. Tighten the clamp. You know you’ve done so sufficiently when the piston has moved so that you can place the caliper assembly over the newly installed pads.

Lastly, reinstall the caliper, which should be the opposite process of how you removed it, and put your wheel back on. Your Toyota is now ready to start cruising the streets of Huntington Beach again. This job should take you about half an hour as well.

These are both relatively advanced jobs, but you should be able to do them provided that you do the research first and get all of the new parts and tools you need beforehand. Watch videos and turn to your car’s manual if you’re having a hard time locating anything.

If you feel like you aren’t up to these tasks yet, there’s no shame in it. You can take the car to a Huntington Beach mechanic and pay to have them done, and some mechanics will be willing to let you watch them work if you tell them that you’re trying to learn.

If you see someone do these chores then maybe next time you’ll be ready to tackle them yourself. Just be sure to have a friend or family member with you who is more experienced in the automotive realm. Remember that everyone started somewhere, and that car knowledge is a learned skill rather than one which is naturally occurring.

Once you’ve mastered these abilities, then you can move on to things like doing a radiator flush, switching out your windshield wipers, and doing some essential battery maintenance. Your car is always going to need work, and the more things you learn how to do yourself, the more money you can save.    

Categories: Info Article